Designed to eliminate up to 95% of boat roll, the Seakeeper 26 is sized for vessels ~70′ – 84’, up to ~75 tons. Unlike traditional external fins, the Seakeeper 26 has no outside appendages, requires only modest electrical power, and can be installed virtually anywhere on board.
|Max Rated Speed||5,000 RPM|
|Angular Momentum at Max Rated RPM||26,000 N-M-S|
|Anti-Rolling Torque at Max Rated RPM||56,000 N-M|
|Spool-up Time to Max Rated RPM||90 minutes (5,000 RPM)|
|Spool-up Time to Stabilization||70 minutes (4,250 RPM)|
|Spool-Up Power||3000 Watts Max|
|Operating Power||1000 – 3000 Watts (Sea State Dependent)|
|AC Power Input||220 VAC, 50/60 Hz, Single Phase|
|Control Power||240 Watts|
|Control Power Input||24 VDC @ 10 Amps|
|Seawater Pump Power Input |
Over Current Protection based on installed pump rating
|220 VAC @ 5 Amps Max|
|Weight||3,155 lbs (1,431 kg)|
|Envelope Dimensions||52.7 L x 55.9 W x 40.4 H (inches)|
1.338 L x 1.419 W x 1.023 H (meters)
|Noise Output||72-74 dBC at 1 meter|
|Sea Water Supply to Heat Exchanger||30 LPM (8 GPM) maximum |
15 LPM (4 GPM) minimum
|Ambient Air Temperature||0° – 60° C (32° – 140° F)|
Frequently asked questions
What is a Seakeeper and what does it do?
It is a computer controlled gyroscope that eliminates most boat roll, including the fatigue, anxiety and seasickness that goes with it. Because of this game changing effect, PR Nautica have successfuly installed over 30 Seakeeper units worldwide.
How much does the Seakeeper weight, and what are the power and space requirements?
Typically, the Seakeeper weighs between 2 and 4% of boat weight, requires half or less the power of air conditioning, and fits in available space down in the after part of the hull. Nothing extends outside the hull and the Seakeeper is a small percentage of the overall volume of the boat.
Is there a Seakeeper suitable for my boat?
Seakeepers are sutiable for most boats 30 feet and above. PR Nautica can install the best option on new vessels and as a retro project. Up to 20 tons, vessels 30-50′: Seakeeper 5 Up to 35 tons, vessels 50-65′: Seakeeper 9 Up to 70 tons, vessels 65-80′ : Seakeeper 16 Up to 100 tons, vessels 80-100′: Seakeeper 26 Greater than 100 tons, vessels >100′: Seakeeper 35
I have an existing boat, can a Seakeeper be installed after build?
Yes, we can fit Seakeepers to both new vessels and aftermarket. The time of a retrofit installtion will vary depending on the Seakeeper and the model of the vessel. Typical installation time is 1-3 weeks. Get in touch for a custom quotation.
As an official Seakeeper Partner we have conducted over 30 exciting Seakeeper projects world wide.
Seakeeper UK Service Center, Installation Center, and Mobile Service Center.
Get in touch to learn more about how Seakeeper can eliminate boat roll, including the fatigue, anxiety and seasickness that goes with it.
PRINCESS S78 – SEAKEEPER 18
A Seakeeper 18 Retrofit to a Princess S78. Using specialist sensors and software we were able to determine a 89% reduction in roll.
PRINCESS V48 – SEAKEEPER 5
Another industry first Seakeeper install. A Seakeeper 5 to a Princess V48.