Seakeeper 1

To bring stabilization to boats as small as 23 feet, we knew we had to break the mold. The new Seakeeper 1 features a flush mount design for easier installation, runs exclusively on 12V DC power, and can be installed virtually anywhere on board.

Max Rated Speed	9,750 RPM
Angular Momentum at Max Rated RPM	1,000 N-M-S
Max Anti-Rolling Torque at Max Rated RPM	2,620 N-M
Spool-up Time to Max Rated RPM	30 minutes (9,750 RPM)
Spool-up Time to Stabilization	15 minutes (7,310 RPM)
Power Consumption
Spool-Up Power	600 Watts Max
Spool-Up Power Input	12 VDC @ 55 Amps
Operating Power	300 – 600 Watts (Sea State Dependent)
Operating Power Input	12 VDC @ 25-50 Amps
Control Power	N/A
Control Power Input	N/A
Seawater Pump Power Input Over Current Protection based on installed pump rating	12 VDC @ 15 Amps Max
Weight	365 lbs (165 kg) Approximately
Envelope Dimensions	22.9 L x 23.6 W x 15.7 H (Inches) 0.582 L x 0.598 W x 0.398 H (meters)
Noise Output	62-64 dBC at 1 meter

Drawings

Frequently asked questions

What is a Seakeeper and what does it do?

It is a computer controlled gyroscope that eliminates most boat roll, including the fatigue, anxiety and seasickness that goes with it. Because of this game changing effect, PR Nautica have successfuly installed over 30 Seakeeper units worldwide.

How much does the Seakeeper weight, and what are the power and space requirements?

Typically, the Seakeeper weighs between 2 and 4% of boat weight, requires half or less the power of air conditioning, and fits in available space down in the after part of the hull. Nothing extends outside the hull and the Seakeeper is a small percentage of the overall volume of the boat.

Is there a Seakeeper suitable for my boat?

Seakeepers are sutiable for most boats 30 feet and above. PR Nautica can install the best option on new vessels and as a retro project. Up to 20 tons, vessels 30-50′: Seakeeper 5 Up to 35 tons, vessels 50-65′: Seakeeper 9 Up to 70 tons, vessels 65-80′ : Seakeeper 16 Up to 100 tons, vessels 80-100′: Seakeeper 26 Greater than 100 tons, vessels >100′: Seakeeper 35

I have an existing boat, can a Seakeeper be installed after build?

Yes, we can fit Seakeepers to both new vessels and aftermarket. The time of a retrofit installtion will vary depending on the Seakeeper and the model of the vessel. Typical installation time is 1-3 weeks. Get in touch for a custom quotation.