Wi-Fi Router

To supply and fit a basic 4G Router with external GSM antenna for increased 3G/4G range, including mount, cabling, installation, and WiFi bridge (for connecting to Marina WiFi hot spots).

Protection Covers

Supply a Dining table cover in brown with soft inlay.

Supply a Cockpit table cover in white.

Supply a Flybridge table cover in white.

Oils

Supply 10ltrs of 46 grade Hydraulic Oil for platform and passerelle.

Supply 10ltrs of Steering Oil.

Supply 5ltrs of Trim Tab Oil.

Electronic charts

Supply a Platinum chart cartridge Eastern med

Generator Spares

Supply a Onan Generator Spares Kit c/w a spare impeller kit and `V` belt.

Spare Anodes

Hull anodes x 4

Bathing platform Anodes x 4

Trim tab Anodes x 4

Transom ladder x 4

Bow thruster x 4

Stern Thruster x 4

Volvo D13 engine spares, to include:

2 x Impellers 4 x big oil filters

10 x screws 4 x small oil filters

2 x `V` Belts 4 x Fuel filters

4 x big Zinc Anodes 4 x Fuel pre-filters

4 x Small Zinc Anodes 20 lt of engine oil

4 x Coolant 1 x 30 grade oil

Water maker spares

Supply a spares kit for the Idromar water maker

USB sockets

To supply and fit 2 x USB sockets into waterproof enclosures behind the Flybridge `U` shaped seating

To supply and fit a USB socket beside the fusion stereo in the Flybridge glove box

Tender Installation

To fit a tender to the bathing platform, to include the preparation, launch, commission and loading of the tender, tender will be fitted onto custom made Teak chocks and secured with ratchet straps with stainless steel ends and tied to stainless steel deck eyes which will be recess and bolted through the platform.

Water filter

To fit the owner supplied water filters between the fresh water tank and the domestic water system pump

Icemaker filter

To fit the owner supplied filter on the domestic water supply to the saloon icemaker

Privacy screen

To supply a white mesh privacy screen to fit to the aft of the cockpit seating

Monitoring system

To run cables from the systems requiring monitoring remotely, cables will be run from each system and run to the lower helm console, cables will be connected to a din rail mounted connection block so connection to a monitoring system can be completed.

Labour rate @ £325 per day